10.0.0.1 – Xfinity Admin Login Router

Share This Post

Table of Contents

10.0.0.1 is the wireless gateway login default IP address to log in to the admin panel of a router. People often mistakenly put 10.0.0.0.1, 10001 admin login, which is actually wrong, and it will return an invalid webpage.

The correct IP address is supposed to be 10.0.0.1. People often get the two IP addresses mixed up because they look very similar to each other, and they don’t know that ip address 10001 consist of four eight-bit numbers, with each number in the set ranging from 0 to 255. So, the full IP addressing range goes from 0.0.0.0 to 255.255.255.255.

10.0.0.1 Xfinity Default IP Login
10.0.0.1 Xfinity Default IP Login

10.0.0.1 is used by router brands such as Xfinity, Comcast, and LPB Piso WiFi as the default IP address to login admin settings at http://10.0.0.1/. By logging in to 10.0.0.1, you can manage the wireless settings of the router, such as changing the WiFi password, the network name (SSID), and creating a guest network.

Read more: 192.168.100.1 – Login Admin Router Arris, Motorola, Huawei

How to log in to 10.0.0.1 or login to 10001?

10.0.0.1 belongs to the private class of IP addresses, and it is used to access the Admin Panel of the Router. It is set by default by the router manufacturer, and to change the settings of the router, such as the WiFi password and name (SSID), you need to login to the Admin Panel.

First, your router’s default IP address should be 10.0.0.1 to login 10001. If the default gateway address of your router or device is different from 10.0.0.1, the browser cannot find the 10.0.0.1 administration panel, so you have to find the correct gateway address and try again. After everything is set, you can follow the steps below to reach the administration panel:

  1. Make sure your device is connected to the network. You can do this using an ethernet cable or with a wireless connection. However, use a wired connection when making any changes to avoid the risk of being logged off when you happen to click the Save button. This technique will save your changes and also prevent the risk of any failure. 
  2. Open any Internet browser (Internet Explorer, Google Chrome, Mozilla Firefox, Opera etc.) Make sure that you can browse other websites, in case of interruption of the network by your ISP at peak hours you may encounter such a problem. Additionally, your browser stores cache and cookies locally on your device, try removing them.
  3. Type http://10.0.0.1 or 10.0.0.1 in the address bar of the browser and press Enter. If you cannot access, it is possible that you do not enter the correct IP address in the browser’s URL bar. Sometimes users can type www.10.0.0.1.com, add http:// at the beginning. Error “0” (zero) for “O” or 10.0.0.0.1, which is an invalid address because the IP address of the gateway contains four decimal numbers, which is presented in decimal notation and here are five values, due to which you have problems accessing the admin panel.
  4. You will be redirected to a page called the management console or configuration center.
  5. In this login screen, enter your device’s default username and password in the relevant fields. Make sure you enter the correct username and password because each router brand has a different set of default username and password.
  6. When you enter your login information, you will reach the router admin admin login 10001 panel. You can make any changes on your device using this interface.

If, after following the steps, you still have trouble logging in, restarting your WiFi network and router is the most common way to fix it. Wait at least a few minutes before reconnecting to your network.

IP Address 10.0.0.1 Username and Password

10.0.0.1 is a local IP address used to access the router’s administration panel. The IP address 10.0.0.1 is set as the default address by various router manufacturers. With this IP address, users have access to the administrative panel of their router. From the admin panel, you can change the router settings such as WiFi password, name (SSID), and many more.

There are 2 ways to change username and passwords: 

Checking the Manual 

  • If you have forgotten the 10.0.0.1 IP address username and password required to log in to your device, check the user manual of your device. If you cannot find the user manual, you can find the information you are looking for on the list of default username and password for routers which contains default login information for many router brands and models.
  • Here’s the list of different brands of routers, the IP address they use, and their usernames and passwords:
Xfinityhttp://10.0.0.1/adminpassword
Comcasthttp://10.0.0.1/adminadmin
TP-Linkhttp://192.168.0.1adminadmin
D-Linkhttp://192.168.0.1adminadmin
Linksyshttp://192.168.1.1adminadmin
Intelbras NBOXhttp://10.0.0.1adminadmin
Arris TG1682Ghttp://10.0.0.1adminadmin
Linksys EA6200http://10.0 0.1adminpassword
Asushttp://192.168.1.1adminadmin
Belkinhttp://192.168.2.1adminadmin

Resetting the Router
If you have previously changed your password and cannot log in, the best thing you can do is reset your router. When you reset your device, all your configurations will be changed to the factory settings. In this way, you can log in with the default username and password. You can follow the steps below to reset your device:

  • Find the RESET button on the back or side of your device.
  • With the help of a thin, pointed object such as a needle, paper clip, toothpick, press and hold the reset button for about 10-15 seconds and release it when the lights start flashing.
  • When you do this, all settings of your device will be reset. You can now log in using the default username and password.

10.0.0.1 is a local IP address used to access the router’s administration panel. The IP address 10.0.0.1 is set as the default address by various router manufacturers. With this IP address, users have access to the administrative panel of their router. From the admin panel, you can change the router settings such as the WiFi password, name (SSID), and many more.

Common Issues with 10.0.0.1 IP Address

With 10.0.0.1, you may encounter some issues while you’re trying to access the Admin Panel. 

10.0.0.1 responds too slow

You can try logging with a different IP, such as 192.168.1.1, 192.168.0.1, or 192.168.1.254.

If you are still receiving this issue, then it may be that there is some issue with the wire that you’re using or with the hardware of the router. A common fix for this is to look for any loose connections and reboot your router.

Incorrect IP Address

Make sure you’re typing the IP address properly, it is often mistaken for 10.0.0.0.1, which is an invalid URL. The correct IP is 10.0.0.1. If you type 10.0.0.0.1, the browser will simply take you to the Google search result page or the default search engine specified by you. Even adding https:// at the beginning of the URL will make it invalid.

Unresponsive/ inadequate gateway device

This error comes from technical errors. You should reboot your router and see if the problem still persists.

Incorrect client address assignment

This happens on the wireless network when the IP addresses are assigned automatically to the clients, due to which the IP address of your device may be different from 10.0.0.1.

More To Explore

Logging into 192.168.203.1

The username and password depend on the device or router manufacturer and the specific configuration set by the network administrator. Common usernames and passwords that

Easy Login admin 192.168.50.1

To log in to the admin page of 192.168.50.1, follow these steps: Note: If you cannot access the login page or if the default credentials

How to login admin 192.168.49.1

To login to the admin interface of a router with IP address 192.168.49.1: Once you have successfully logged in, you can access the router’s settings

How to login admin 192.168.188.1

To login to the admin page of an IP address of 192.168.188.1, follow these steps: Note: The username and password can vary depending on the

The IP address 10.0.1.9

How to log in to your router using the IP address 10.0.1.9 You can change your software router’s configuration by logging in to your router’s

AT&T Default Login

A typical IP address consists of four numbers separated by full stops (period marks). For example, 192.168 is the first octet of an IP address

Network speed: 10.1.1.0/24

What is 10.1.1.0 subnet 24? Here is the information you may want to know if you see 10.1.1.0/24 and wonder what it is. Six different