– Admin Router Login for Wifi Network

Share This Post

Table of Contents

Many manufacturers of wireless routers and modems use as the default login IP address to access the admin panel.

Home networks use these addresses. Any local network device (including an iPad, laptop, desktop computer, mobile phone, etc.) can have automatically assigned to it by a router.

The IP range, which includes the IP is a private IP range that complies with RFC 1918’s specifications. On the open Internet, addresses like are not permitted. 

The private network must use a proxy server or gateway if it needs to connect to the internet.

The common IP address is a piece of a private class C network. Your laptop, tablet, or phone will receive an IP address like if you connect to this network.

Login on your router or modem for

If you use the Internet, have that router plugged in and have a simple Wi-Fi network set up and operational. When this happens, your Wi-Fi network may not be optimized for your needs, or your preset network may need to improve. You must log into your router using to modify your Wi-Fi network.

When something goes wrong, you might still need to use even if your router was set up by a pro (ISP). Knowing how to access your router’s admin page is always useful in case you need to make a change. Login to IP default address on Linksys Login to IP default address on Linksys

To log into your router or modem using the IP address, follow the instructions below:

  • An internet-enabled computer device, such as a laptop, computer, or smartphone, is required. After that, you must link your computer device to your router. Either a wired or wireless ethernet connection can be used for this.
  • Open your preferred web browser, such as Google Chrome, Mozilla Firefox, Microsoft Edge, or Safari, while your computer device is connected to your router. Then type into the URL search bar to enter your IP address.
  • Entering the correct information will allow you to log into the router’s Admin Panel. The default login information for your router can frequently be found on the base of the device if you don’t know it and have never changed it.

Alternatively, they ought to be listed on the website of the manufacturer of the router. You can restore the router to its factory settings if you change them and then forget them. Any previous changes you made to your router will be lost, but the login information will be reset to the defaults.

Configure the router with

After logging in, you can begin configuring your router.

  • Go to the router’s administrative page. Find the general settings menu by scrolling through the list of options on the home page.
  • Select the menu with a similar name as the router password.
  • Enter the password you want to use. It should be something secure that you can remember.
  • Always save the details after making changes to the information.

You can modify the router’s username while in the menu for general settings.

How To Change The Name And Password Of Your Wi-Fi Network

You can experiment with additional router settings, but you might also want to change the Wi-Fi network information. Its SSID or Service Set Identifier identifies your Wi-Fi network. 

  • Open the menu for general settings.
  • Choose the option for wireless settings.
  • Enter the name of the WiFi network you want to use in the SSID field. 
  • Save changes.
  • Your Wi-Fi network password change option will be available in the same menu as the SSID. Enter your desired password in the Wi-Fi network password field after selecting it.
  • The login information for your Wi-Fi network and router has now been set. You should continue exploring now that your internet is secure. Two examples include setting parental controls and network optimization.

Default router username and password

Usually, the companies that make routers set the default usernames and passwords. Therefore, if you want to take action, all routers have a list of usernames and passwords that you can eventually improve.

The passwords and usernames can occasionally be admin, 1234, or none. The user manual and the bottom or back of the router both contain the login details and data for your specific router.

  • Do so by opening your browser and logging into your account. 
  • Type into your browser’s address bar.
  • After that, change the login area’s default username and password.
  • From this point on, you can modify your default username and password.
  • Click Use immediately after completing each of the necessary fields.
  • Now that almost everything has been completed, you can access your control panel with your new username and password. You can also use the registry dropdown below to access the router’s default username and password.
IP AddressUsernamePassword

Resetting the password for

Resetting your modem is all that is required. You can easily do this by pressing the reset button on the bottom or back of your modem.

Your modem will return to factory settings if you press and hold this tiny button for about 20 seconds (you might need a toothpick for this).

You should be aware that resetting your modem will cause you to lose your internet connection. Therefore, it is preferable to seek an expert’s advice in this area.

If you need more knowledge, we advise you to seek assistance from a knowledgeable person.

How to Find Your IP Address

A typical private IP address is, but it might not be yours. If is not your IP address, you can find the default IP address of your router by searching for your router model online. Your router’s manual may also contain a listing of the IP address. If those approaches fail, you can use your computer to find your IP address.

Microsoft Windows:

1. In the bottom right corner of your screen, click the network icon.

2. Once the menu is active, choose the Wi-Fi network you use to access the internet.

3. Various information will be displayed when you choose the Wi-Fi network. One of these will be IPv4, and next to it will be a string of numbers that resembles; this string of numbers is your IP address.

Mac OS X

1. Launch the Apple menu.

2. Select “System Preferences” from the list of choices.

3. Select the internet access network you use.

4. Your IP address will appear after the word router.

Only if you change it will your private IP address change. If your router’s IP address does not match or one of the other default IP addresses, it may have previously been changed. If that’s the case and you’d like to reset it to default, you can do a factory reset on your router, which will also reset all of its other settings.

How To Change Your Local IP Address

The actual local IP address of your router is another frequently modified router setting. There are two IP addresses for your router; details are provided below. Take note of your new IP address if you change it from because you need it to access your router’s admin page.

  • Log in to your router’s admin page once more. The steps to take are explained above. Look for the general settings menu or a similarly named option on the home page.
  • After that, choose “network settings.”
  • Navigate through this menu until “router settings” appears. Your IP address must be entered in this field.
  • Save all of your changes.


One of the most popular IP addresses is You must now enter the correct IP address to properly and safely use the Internet connection.

It’s also crucial to remember that the IP addresses on the router and laptop or computer must match exactly. Untangling any issues with the IP address is very easy.

You discovered how to avoid pitfalls and create router settings in this article. Remember to look at our other web pages if you have a different issue.

More To Explore

Logging into

The username and password depend on the device or router manufacturer and the specific configuration set by the network administrator. Common usernames and passwords that

Easy Login admin

To log in to the admin page of, follow these steps: Note: If you cannot access the login page or if the default credentials

How to login admin

To login to the admin interface of a router with IP address Once you have successfully logged in, you can access the router’s settings

How to login admin

To login to the admin page of an IP address of, follow these steps: Note: The username and password can vary depending on the

The IP address

How to log in to your router using the IP address You can change your software router’s configuration by logging in to your router’s

AT&T Default Login

A typical IP address consists of four numbers separated by full stops (period marks). For example, 192.168 is the first octet of an IP address

Network speed:

What is subnet 24? Here is the information you may want to know if you see and wonder what it is. Six different