Admin Login Address in Arris, D-Link, Linksys Router

Share This Post

Table of Contents

For connecting to the admin management system, many manufacturers of wireless routers and modems use as the default login IP address. Admin Login Address in Arris, D-Link, Linksys Router

How to Login 

You should modify your Wi-Fi network if you don’t have a password set or aren’t configured for your needs. You must then enter your router’s username and password using

Understanding how to access your router’s admin page is essential. The instruction is as follows:

  1. Verify that the login IP for your router is To find the router’s login details, look at the label at the bottom of the router.
  2. Join the router to the computer or smartphone. It can either be wirelessly connected to the router directly or connected to the computer’s LAN port by a network cable.
  3. Launch your preferred web browser, such as Safari, Microsoft Edge, Mozilla Firefox, or Google Chrome. Enter in your browser’s address bar and press “Enter” or go directly to this page at to access the router administration’s user login panel.
  4. On the login page, enter the appropriate username and password. The commonly used default username and password for commands are “admin.”
  5. After clicking “Login,” you ought to be able to log in and configure your router.

The default login information for your router can frequently be found on the base of the device if you don’t know it and have never changed it. Alternatively, they ought to be listed on the website of the manufacturer of the router.

You can restore the router to its factory settings if you change them and then forget them. Any previous changes you made to your router will be lost, but the login information will be reset to the defaults.

Routers Companies Using

2wire, Netopia, Arris, D-Link, LogN, Linksys, ZyXEL, Motorola, Paradigm, Siemens, Prolink, Qwest, Teltonika, Telus, Zoom, and Actiontec are a few of the most well-known businesses that use as their login IP.

How to set up the router with IP address

  1. Access the router admin page.
  2. Locate the general settings menu by scrolling through the list of options on the home page.
  3. Select the menu with the same name as the router password. Enter the password you want to use. To be safe, you should keep the password in mind.
  4. Save the information.

Use the same procedure if you want to modify the router’s username.

How to change the password of routers using IP address

Your Wi-Fi network is identified by its SSID or Service Set Identifier. You can use this method to modify or change the Wi-Fi network settings for more secure purposes, to set parental controls, etc.

You can also use these steps to recover your username and password if you’ve forgotten them:

  • Go to the router’s administrative page.
  • Locate the general settings menu by scrolling through the list of options on the home page.
  • Choose Wireless Settings from the menu.
  • Enter the name of the WiFi network you want to use in the SSID field.
  • Save the information.

If you want to modify your Wi-Fi network password, follow the same procedure. In the same menu as the SSID, it will be. Enter your desired password in the Wi-Fi network password field after selecting it. To be safe, you should keep the password in mind.

You can refer to the router default usernames, and passwords list if you haven’t changed the default user and password that comes with the router. You can modify and alter all internet settings once in the router’s admin panel.


How to find your router’s IP address 

A typical private IP address is, but it might not be yours.

If you try to access your router at and it takes a long time to load or doesn’t load at all, your network most likely uses a different address. To find a solution, consult our list of router IP addresses or look up a tutorial.

If your router’s IP address isn’t, you can find it using the Ipconfig command on Windows and Mac computers.

  1. To begin, click the network icon. It is located in the bottom right corner of the screen.
  2. When the menu appears, click the internet-connected Wi-Fi network.
  3. Choosing the Wi-Fi network will give you access to various information. The IPv4 address will be one of them and will have a string of numbers next to it that resembles These figures represent your IP address.

How to Troubleshoot IP address

The computer’s local IP is incorrect.

You won’t be able to access the router’s login page try other default IP addresses:,,

Browser URL input error

Many browsers have sizable search boxes on their home pages, and users are accustomed to typing into the search box—which most definitely does not open the login page.

The address bar in the browser, or the top of the browser where the URL is displayed, is the proper place to type

Issue with the router connection

Before using a network cable to attach the modem to the router’s WAN port, connect the modem to an external phone line or optical fiber.

Through WIFI, a laptop or mobile device can be directly connected to the router. A network cable is required to connect a desktop computer to the router’s LAN port.

Router configuration issue

Some users believe all routers have the IP address The truth is that not every router’s default login IP is; it can differ depending on the router’s brand and model.

You cannot access the router’s setup page with this IP if the router’s IP address is not

To increase the router’s security, some users might initially change the default login address. If this happens, will no longer function, and you must use the new login address.

Network cable problem

There could be a bad cable or an aging crystal head. When this issue occurs, will fail to open the router’s setup interface. You need to ensure the cable is available for regular use.

Use spare cables to replace it with an intact one, plug it in tight, and then try again to see if can log in to the router’s setup page. 

If there is a problem with the network cable, Check if the network icon in the lower right corner of the computer displays abnormally; or directly run “Ping” through the CMD command on the computer to see whether the connection between the computer and the router is normal.

How to restore the factory settings of routers using

If the router settings are messed up, and you can’t access the Internet normally, there are 2 ways to restore factory settings: 

Restore factory settings on the router’s administration page

  1. Log in to the administration page of the router 
  2. Click “Advanced” → “Administration” → “Backup Settings.”
  3. Click the “Revert to Factory Default Settings” button, and a dialog box will appear, asking if you can restore the factory settings to avoid misoperation and affecting regular Internet access.
  4. Click the “OK” button, and the router will reboot automatically. 

After reboot, the router will be restored to factory settings.

This method can only be operated by knowing the router’s username and password. 

Reset the router to factory settings by pressing the RESET button

  • Find the RESET button on the back of the wireless router. (This button generally has two forms, one is a protruding button that can be pressed directly, and the other is a small hole-shaped button, which requires a paper clip, pin, and other fine-pointed objects to be inserted into the hole and is pressed continuously.)
  • The router is powered on, and the power indicator remains on.
  • Press and hold the RESET button for about 10 seconds and then release it. All the indicators are on and then all off. 
  • After waiting for a few seconds, the router starts working again, which means it successfully restored to the factory setting.


① The router cannot be powered off when restoring to factory settings because it may damage the router’s hardware.

② After the router is restored to factory settings, all settings will be lost. You need to set up the router again to access the Internet usually, so please be cautious about restoring factory settings.

More To Explore

Logging into

The username and password depend on the device or router manufacturer and the specific configuration set by the network administrator. Common usernames and passwords that

Easy Login admin

To log in to the admin page of, follow these steps: Note: If you cannot access the login page or if the default credentials

How to login admin

To login to the admin interface of a router with IP address Once you have successfully logged in, you can access the router’s settings

How to login admin

To login to the admin page of an IP address of, follow these steps: Note: The username and password can vary depending on the

The IP address

How to log in to your router using the IP address You can change your software router’s configuration by logging in to your router’s

AT&T Default Login

A typical IP address consists of four numbers separated by full stops (period marks). For example, 192.168 is the first octet of an IP address

Network speed:

What is subnet 24? Here is the information you may want to know if you see and wonder what it is. Six different