192.168.10.1 – Login wifi repeater

Share This Post

Table of Contents

The default login IP for modems and wireless routers is 192.168.10.1 Brands like TRENDnet, UPVEL, or D-Link are the main users of it.

Numerous different IP addresses, such as 192.168.1.1, 192.168.0.1, or 10.0.0.1, were used to access the control panel of your wireless router, travel router, or DSL wireless router. This standard IP is also called the Default Gateway IP.

192.168.10.1 Login wifi repeater
192.168.10.1 Login wifi repeater

There is only one circumstance in which the IP 192.168.10.1 is required, which is during a technician’s installation process.

However, you can alter the WiFi network name (SSID), WiFi password, or parental controls using 192.168.10.1 as an IP. You can manage data traffic, view statistics, and set up the router settings in the navigation panel after logging into your router.

5 Steps for Admin Login at 192.168.10.1

  1. Remove the router from its packaging. It is regarded as the network manager for your home or place of business. Connect it to the power source to start a simple network. Some routers are pre-configured and ready to use right away, but others may need configuration.
  2. Switch on a computer that has internet access, such as your laptop, desktop, tablet, or smartphone, and connect to your router. You can connect a smartphone or tablet to the Wi-Fi network. To guarantee stability, a computer or laptop connected to the router via a wired ethernet connection is preferable. Verify that the connection was successfully established and that the Power, WAN, LAN, and WLAN lights are all on. The power button should have a steady light. The following three lights or diodes should continuously flash or blink.
  3. Open your preferred web browser after syncing your device with your router. You might use Safari, Microsoft Edge, Mozilla Firefox, or Google Chrome as your browser.
  4. Enter 192.168.10.1 in the search bar of your browser after it launches. (Note: This is the bar at the top of the window used to take you directly to a website; it is not the bar for Google search or a similar service.) If this occurs, an error message may show that 192.168.10.l is not the correct IP address for your router. Now is the time to spell-check everything. Your browser’s autocomplete function can be deceptive at times. This article explains how to find the correct IP address of your router.
  5. You will be directed to your router’s login page. You must log into the interface using the login information connected to your router before you can make any changes to your router. 
  • The default credentials associated with your router, which you can typically find on the base of your router, will be used if this is your first time logging in. If not, you might be able to locate the login information in your router’s manual. If you’ve exhausted both possibilities, you can look up the router’s make and model online, which should yield the login information you require. Be aware that some router models won’t require any information to log in at first. 
  • You will need to enter the same information if you or someone else has previously logged in and set a username and password. You can reset the router if you forget the login information. To factory reset to default settings, use the following methods:
  • Power up the router and hold the reset button down for 30 seconds. (It is typically on the unit’s side or back.) Use a paper clip or the tip of a pen.
  • Unplug the router from the power while continuing to hold down the reset button, then wait an additional 30 seconds.
  • Reconnect the router while holding the button down, then wait an additional 30 seconds.
  • Using the procedures listed above, return to the router’s interface page and try logging in once more.

From the admin interface, you can control every setting after logging in.

Some popular Routers that use 192.168.10.1 as their default IP

Eclipse WiFi EW28650

Default username: root

Default password: root

TRENDnet TEW-718BRM

Default username: admin

Default password: admin

TRENDnet TEW-634GRU

Default username: admin

Default password: admin

D-Link DSR-1000N rev A1

Default username: admin

Default password: admin

ZyXEL NBG-415N

Default username: admin

Default password: 1234

TRENDnet TEW-651BR V1.0R

Default username: admin

Default password: admin

TRENDnet TEW-651BR V2.xR

Default username: admin

Default password: admin

TRENDnet TEW-692GR V1.0R

Default username: admin

Default password: admin

Make Your Router Configurable Using 192.168.10.1

After entering your username and password for the router interface at 192.168.10.1, it’s time to customize the settings to suit your needs.

Although the lengthy strings of numbers and abbreviations may seem intimidating, you should be aware that any settings can be returned to their default state by simply pressing a button. However, knowing where to begin can be helpful. 

Your login information should be changed first, then take the following actions:

1. Access the menu for general settings.

2. Select the router password or an alternative with a similar name.

3. Type in your chosen password.

4. Save the adjustments.

On the same menu, you should also be able to change the router’s username to a name of your choice.

To modify Network Name and Password through 192.168.10.1?

Through the admin interface of your router, you can quickly change the SSID and password of your wireless network. You can modify the SSID and password after entering the admin interface at 192.168.10.1 and setting it to your liking. The procedure is quick and easy, and it typically only takes a few minutes. 

Here’s how to go about it:

1. Use the aforementioned to access the router’s admin interface.

2. After logging in, select Security under Home > Wireless. (Your router may not have the exact same navigation, but you would find these settings in the Wireless section.)

3. Look for the Network Name/SSID by scrolling down.

In the space provided, type your new SSID.

4. To update the password, choose your wireless network’s encryption protocol (WPA3 or WPA2 are recommended) and type your new password into the WPA Passphrase field.

5. To confirm the adjustments, click on “Apply/Save.”

List of the most used default usernames and passwords for the device IP 192.168.10.1

#UsernamePassword
1adminadmin
2admin(empty)
3admingenerated randomly
4admin1234
5admin(sticker on the bottom of the device)
6(empty)admin
7n / aadmin
8adminmotorola
9adminpassword
10adminDZY-W2914NSV2
11n / a1234
12admin
13admin(label on the bottom of the router)
14admin
15(empty)pcwrt

Finding IP Address 192.168.10.1 on your computer

Your router’s default IP address, such as 192.168.10.1, is your private IP address. If you are unsure of your router’s default IP, you can frequently find it listed in detail on the router’s base, in the user manual that came with the router, or on the manufacturer’s website. By performing a simple Google search, you can find some websites that can provide you with the necessary information for the make and model of your router. In the absence of that, you can use your computer to determine your router’s IP address, using various techniques for various operating systems:

Microsoft Windows:

  1. To begin, click the network icon in the bottom right corner of your screen.
  2. Locate the internet network you use and select properties while the menu is open.
  3. Browse this menu until you locate Ipv4. 

Your gateway IP address is a string of numbers that looks something like 192.168.10.1.

Mac OS:

  1. Launch the Apple menu.
  2. Click on the “System Preferences” option.
  3. Decide on the internet access network you use.
  4. Your IP address is located next to the word router.
  • The steps above can be used to change your private IP address, but it won’t take effect immediately.
  • You can change your private IP address using the instructions above, but it won’t change automatically.
  • It’s possible that someone changed the IP address in the past if, for some reason, it’s not 192.168.10.1 or a related alternative. Although a hard reset will reset all settings, it shouldn’t be a problem because you cannot access your router’s interface without its IP address. You won’t be able to make any changes to the network and will find it difficult to troubleshoot any problems if and when they occur if you can’t access the router’s interface.

More To Explore

Logging into 192.168.203.1

The username and password depend on the device or router manufacturer and the specific configuration set by the network administrator. Common usernames and passwords that

Easy Login admin 192.168.50.1

To log in to the admin page of 192.168.50.1, follow these steps: Note: If you cannot access the login page or if the default credentials

How to login admin 192.168.49.1

To login to the admin interface of a router with IP address 192.168.49.1: Once you have successfully logged in, you can access the router’s settings

How to login admin 192.168.188.1

To login to the admin page of an IP address of 192.168.188.1, follow these steps: Note: The username and password can vary depending on the

The IP address 10.0.1.9

How to log in to your router using the IP address 10.0.1.9 You can change your software router’s configuration by logging in to your router’s

AT&T Default Login

A typical IP address consists of four numbers separated by full stops (period marks). For example, 192.168 is the first octet of an IP address

Network speed: 10.1.1.0/24

What is 10.1.1.0 subnet 24? Here is the information you may want to know if you see 10.1.1.0/24 and wonder what it is. Six different