192.168.100.1 – Login Admin Router Arris, Motorola, Huawei

Share This Post

Table of Contents

192.168.100.1 is a private IP address that is used as a default gateway address to login as admin to the settings of a router. It is assigned mostly by modem manufacturers such as Arris, Motorola, Huawei, ZyXEL, and TP-Link.

192.168.100.1 on Arris, Motorola, Huawei Admin Router Login
Login to 192.168.100.1

Read more:

192.168.1.1 Admin Login For Wireless Router Setting

192.168.0.1 – Admin Login And Quick Setup

10.0.0.1 – Xfinity Admin Login Router

How To Login to 192.168.100.1?

You must first log into the admin panel in order to access the router management interface using IP address 192.168.100.1. Ensure that 192.168.100.1 is your router or modem’s only possible default gateway address.

You won’t be able to access the login page if the default gateway is not 192.168.l00.1; instead, the browser won’t be able to access any web pages. 192.168.100.1 ought to be the router/default modem’s gateway address.

Next, proceed as follows:

  1. Use an Ethernet cable or wirelessly connect your device to the router or modem.
  2. Launch your web browser, which you use to access the internet, and then turn on your computer. Use the most recent version of the web browser.
  3. Open a new tab, enter http://192.168.100.1 or 192.168.100.1 in the address bar, and click OK.
  4. A login screen will now appear. To proceed, you must enter your login information.
  5. To continue, enter the username and password. If you don’t know your router’s or modem’s default login information, you can look it up online by searching for it on the router’s box.
  6. Now that you have logged in, you can access the router management interface.
  7. You can change the network name and the type of internet connection you use and add new devices in the admin panel.
  8. You can also experiment with the bandwidth and transmission rates. With the 192.168.100.1 admin panel, you can inspect several devices connected to your router.
  9. It is advised that the router’s default username and password be modified to prevent security breaches.

How to Change Password for 192.168.100.1?

To modify the Wi-Fi SSID and Password of the most well-known router brands, adhere to these steps:

TP-Link

  • Access the router’s management page by logging in. If this is your first attempt to log in, you may need to create a password for security. Some routers have “admin” as their default username and password.
  • Click Wireless > Basic.
  • You must enter a different name from that of 2.4GHz if you have a wireless 5GHz connection. 
  • Write your most recent WiFi name and password underneath Wireless Settings.
  • Save the settings, and the router will restart to apply them.

NetGear

  • Launch a web browser and enter routerlogin.net in the address bar if you do not know the IP address.
  • When prompted, type your login information. If you are familiar with the default settings, enter admin as the username and password.
  • Visit Wireless below BASIC settings > to change the SSID. SSID Broadcast Permitted > In the name box, type the WiFi network’s name.
  • Select WPA2-PSK[AES] from the Option Security menu, then type it into the Password (Network Key) box.
  • Once you’ve modified network settings, click Apply.

Arris

  • By monitoring the aforementioned procedure, log in to the router’s management interface. (Arris gadgets’ default username and password are both empty. Leave all of the boxes blank and without any writing.
  • Once you have logged in, press the Wireless key.
  • There are several wireless settings available.
  • The current SSID and Wi-Fi password can be found next to Networks Name (SSID) and WPA Password, respectively. From here, you can change both the SSID and the Wi-Fi password.

Huawei

  • Sign in to the website for online management. (For Huawei devices, the default username and passphrase are “root” and “admin,” respectively.)
  • Select Wi-Fi Settings and then Basic Wi-Fi Settings after logging in (If you wish to alter settings separately for 2.4 GHz & 5 GHz now, you may visit Advanced settings).
  • In the Wi-Fi name, type a recent name (SSID).
  • In Security mode, select WPA2-PSK and then type your WiFi password.
  • For the modifications to appear, save the settings.

Tip: Always use a strong password to prevent intruders’ unauthorized access to your router. Combining numbers, letters (both uppercase and lowercase), and special characters is acceptable. The ideal number of characters is 12–15.

Forgot 192.168.100.1 Username and Password?

Everyone might have experienced forgetting their username, password, or both, which prevents them from logging in. You can easily retrieve your username and password if you’ve forgotten or lost them for 192.168.100.1, so don’t panic.

You must reset your router to factory settings to retrieve the forgotten username and password. Remember that any modifications you make will be undone.

  • Pick up something pointed and sharp, like a paperclip or needle. 
  • Locate a tiny RESET button on the router’s back. 
  • Use the needle or paperclip to press and hold that button for 10 to 15 seconds. 
  • Release the button after that. All settings, including any modified username and password, will be reset to default when the router reboots itself.

Username and Password List:

Router BrandUsernamePassword
TP-Linkadminadmin
D-Linkadminadmin
Netgearadminpassword
Linksysadminadmin

Troubleshoot 192.168.100.1 Login Problems

If the password doesn’t work, then there could be two possibilities here:

  • You forgot your old password because you changed it. In this situation, the simplest way to regain access to your router is to perform a factory reset. To perform a factory reset, simply press and hold the tiny RESET button on the back of your router for ten to fifteen seconds with a needle or paper clip and then release it. 
  • You can log in again with the default password after the router reboots. You are not entering the router/default modem’s password. Simply conduct an internet search using the exact model number of your router to find the password.

Unable to access anything (i.e., the browser keeps loading)

  • It’s possible that your router’s default gateway address isn’t 192.168.100.1 if your browser cannot access anything at that address. Use the IP address that is listed as the default gateway on your router/modem instead.
  • If you are typing 192.168.l00.1—a misspelling that is frequently confused with IP—please type the gateway address correctly and try again. 
  • By momentarily disabling the network firewall settings, you can see if your firewall prevents access.

Additional Info on 192.168.100.1

The IP address by default is 192.168.100.1. Every IP address has four sets of numbers in the range of 0 to 255. This is because each internet-connected device is supposed to have a specific address.

The device id is contained in the final set, which follows the first three sets of network ids. The network identifier at 192.168.100.1 is 192, and the device identifier is 168.100.1.

The fact that 192.168.100.1 is a personal IPv4 network address means that, unlike with a public IP address, you cannot connect to the user’s router or device from outside the local network.

Only relevant internal local area networks make use of it (LAN). If your network uses dynamic DNS services, you are exempt from this rule because you can connect to the internal network using a publicly available hostname.

Compared to any other personal network address, allowing this address has no impact on network security or performance for clients or routers.

The IP address 192.168.100.1 must only be assigned to one device. Administrators must take special care not to assign this address after it has been given to a series of DHCP router addresses.

Otherwise, IP address conflicts could happen because the router might assign 192.168.100.1 to one device while another already uses it as a fixed address.

None of us can recall the router’s IP address. In this circumstance, it’s imperative not to panic. Companies create tools to figure it out.

More To Explore

Logging into 192.168.203.1

The username and password depend on the device or router manufacturer and the specific configuration set by the network administrator. Common usernames and passwords that

Easy Login admin 192.168.50.1

To log in to the admin page of 192.168.50.1, follow these steps: Note: If you cannot access the login page or if the default credentials

How to login admin 192.168.49.1

To login to the admin interface of a router with IP address 192.168.49.1: Once you have successfully logged in, you can access the router’s settings

How to login admin 192.168.188.1

To login to the admin page of an IP address of 192.168.188.1, follow these steps: Note: The username and password can vary depending on the

The IP address 10.0.1.9

How to log in to your router using the IP address 10.0.1.9 You can change your software router’s configuration by logging in to your router’s

AT&T Default Login

A typical IP address consists of four numbers separated by full stops (period marks). For example, 192.168 is the first octet of an IP address

Network speed: 10.1.1.0/24

What is 10.1.1.0 subnet 24? Here is the information you may want to know if you see 10.1.1.0/24 and wonder what it is. Six different